To Next Page
G
greenjudyJul 28, 2025
What causes a dry chain on my Worx WG384 Chainsaw?
- QqbrownJul 28, 2025
A dry chain on your Worx Chainsaw can be caused by: * No oil in the reservoir. * A clogged vent in the oil filler cap. * A clogged oil passage.
What causes a dry chain on my Worx WG384 Chainsaw?
A dry chain on your Worx Chainsaw can be caused by: * No oil in the reservoir. * A clogged vent in the oil filler cap. * A clogged oil passage.
Why does my Worx WG384 vibrate and not saw properly?
If your Worx Chainsaw rips, vibrates, or doesn't saw properly, it could be due to several reasons: the chain tension might be too loose, the chain could be dull or worn out, or the chain teeth might be facing in the wrong direction.
Why does my Worx WG384 operate intermittently?
Your Worx Chainsaw might operate intermittently due to overheating, applying too much pressure while cutting, a loose connection, defective internal wiring, or a defective on/off switch.
General safety rules for the work environment, including lighting and preventing distractions.
Precautions related to electrical connections, grounding, and avoiding wet conditions.
Advice on staying alert, using PPE, preventing accidental starts, and proper attire.
How to operate and check the function of the chain brake safety mechanism.
Techniques and safety precautions for making cuts with the chain saw.
General| Type | Cordless Chainsaw |
|---|---|
| Power Source | Battery |
| Voltage | 40V |
| Battery Type | Lithium-Ion |
| Automatic Oiling | Yes |
| Chain Pitch | 3/8 in |
| Chain Gauge | .043 inch |
