Why is the chain tension too loose on my Worx WG309?
If the chain tension on your Worx Chainsaw is too loose, it might be due to a dull or worn-out chain. Sharpen or replace the chain. Also, ensure the chain teeth are facing in the correct direction; reassemble the chain if necessary.
What to do if my Worx WG309 has no power?
If your Worx Chainsaw has no power, the issue might stem from a faulty mains socket. Check the power and try using another socket. A damaged extension cord or a faulty fuse could also be the cause. Replace the fuse if necessary.
General| Type | Chainsaw |
|---|---|
| Power Source | Corded Electric |
| Auto-Tension | Yes |
| Auto-Lubrication | Yes |
| Automatic Oiler | Yes |
| Tool-less Chain Tensioning | Yes |
| Voltage | 120V |
| Amperage | 8 A |
| Chain Pitch | 3/8 inches |
Essential safety precautions for all power tools.
Safety guidelines unique to operating a chainsaw.
Guidelines for using extension cords safely with power tools.
Key safety instructions for all appliances.
Instructions and precautions for felling trees safely.
Removing branches and cutting logs into lengths.
Explanation of various symbols used in the manual for safety.
Steps for assembling the chain and guide bar.
How to tension the chain and fill the oil reservoir.
Attaching and adjusting the extension pole.
How to safely turn the chainsaw on and off.
Techniques for making cuts with the chainsaw.
Safety practices to avoid kickback and general safe operation.
Specifics for pole saw use and pruning tree branches.
Guidelines for cleaning, maintaining, and storing the chainsaw.
How to maintain the guide bar and sharpen the chain.
Procedure for lubricating the drive sprocket.
A table of common problems, causes, and remedies for the chainsaw.
To Next Page