What to do if my Worx Chainsaw operates intermittently?
If your Worx Chainsaw operates intermittently, it could be due to a damaged extension cord, a loose connection, defective internal wiring, or a defective on/off switch. Check these components to identify the issue.
Why does my Worx Chainsaw rip, vibrate, and not saw properly?
Your Worx Chainsaw might be ripping, vibrating, or not sawing properly due to several reasons. It could be that the chain tension is too loose, the chain is dull or worn out, or the chain teeth are facing the wrong direction. Check these aspects to ensure proper chainsaw operation.
General| Power Source | Electric |
|---|---|
| Automatic Oiler | Yes |
| Chain Tensioning | Tool-free |
| Bar Length | 40 cm (16 inches) |
| Chain Speed | 12 m/s |
| Oil Tank Capacity | 120 ml |
Covers safety related to work environment, electrical connections, and operator well-being.
Details on kickback causes and operator prevention methods, including handling techniques.
Critical safety warnings specific to operating a chain saw, covering initial precautions.
Procedures for turning the saw on and off, including safety checks.
Overview of built-in safety features designed to reduce kickback incidents.
Explanation and function check of the chain stop lever for immediate stopping.
Guidelines for performing cutting tasks, including oil reservoir checks and log placement.
To Next Page
