Worx WG305.2 - User Manual

Questions and Answers:

P
paul57Aug 11, 2025
What to do if Worx Chainsaw chain/chain bar overheats?
- A
  Anthony McleanAug 11, 2025
  If your Worx Chainsaw chain/chain bar overheats, it could be due to several reasons: 1. There may be no oil in the reservoir. Refill the oil reservoir. 2. The vent in the oil filler cap might be clogged. Clear the vent in the oil filler cap. 3. The oil passage could be clogged. Unclog the oil passage. 4. The chain might be over tensioned. Loosen the chain tension. 5. The chain could be dull. Sharpen or replace the chain.
J
Jason RussoAug 17, 2025
What to do if Worx WG305.2 Chainsaw rips, vibrates, does not saw properly?
- K
  Kelly JonesAug 17, 2025
  If your Worx Chainsaw rips, vibrates, and does not saw properly, it could be due to: * Chain tension being too loose. Tighten the chain tension. * A dull chain. Sharpen or replace the chain. * A worn-out chain. Replace the chain. * Chain teeth facing the wrong direction. Reorient the chain teeth.
P
Pamela WalkerAug 23, 2025
How to fix a dry chain on Worx WG305.2?
- A
  Ashley StaffordAug 23, 2025
  If your Worx Chainsaw chain is dry, it may be because: * There is no oil in the reservoir. Refill the oil reservoir. * The vent in the oil filler cap is clogged. Clear the vent in the oil filler cap. * The oil passage is clogged. Unclog the oil passage.
M
Mary FranklinAug 29, 2025
Why my Worx WG305.2 fails to operate?
- A
  Angelica PerezAug 30, 2025
  If your Worx Chainsaw fails to operate, there are several potential causes: * The chainsaw might not be getting power. Check the power source. * The power source socket could be faulty. Inspect the power source socket. * The extension cord might be damaged. Examine and replace the extension cord if needed.
S
Sara RobinsonSep 3, 2025
Why my Worx Chainsaw operates intermittently?
- D
  Dr. George MedinaSep 3, 2025
  If your Worx Chainsaw operates intermittently, the following could be the cause: * A damaged extension cord. Inspect and replace the extension cord if necessary. * A loose connection. Check connections to ensure they are tight. * Defective internal wiring. Have internal wiring examined by a professional. * A defective On/Off switch. Replace the On/Off switch.