To Next Page
J
jennifersinghJul 27, 2025
Why is the chain on my Worx WG305E dry?
- SSarah ShahJul 28, 2025
If the chain on your Worx Chainsaw is dry, possible causes are no oil in the reservoir, a clogged vent in the oil filler cap, or a clogged oil passage.
Why is the chain on my Worx WG305E dry?
If the chain on your Worx Chainsaw is dry, possible causes are no oil in the reservoir, a clogged vent in the oil filler cap, or a clogged oil passage.
Why does my Worx WG305E chain/chain bar overheat?
If your Worx Chainsaw chain or chain bar overheats, several factors could be the cause. These include: * No oil in the reservoir * A clogged vent in the oil filler cap * A clogged oil passage * An over-tensioned chain * A dull chain
Why does my Worx WG305E rip, vibrate, and not saw properly?
If your Worx Chainsaw rips, vibrates, or doesn't saw properly, it could be because the chain is worn out or the chain teeth are facing in the wrong direction.
Keep the work area clean, well-lit, and free of hazards.
Guidelines for safe use of electrical power tools, including plug and cord precautions.
Measures for operator safety, including alertness, PPE, and preventing accidental starts.
Keep body parts away from the chain; proper hand placement and grip for control.
Use safety glasses, hearing protection, and maintain stable footing.
Caution when cutting limbs under tension to avoid spring back and injury.
Explains kickback causes and how to avoid it through proper technique.
Defines the proper applications for the chain saw.
Instructions for fitting the chain and guide bar onto the saw.
Steps for starting, stopping, and checking the chain brake.
Guidelines for making cuts, including grip, footing, and chain speed.
Additional tips for safe handling and operation.
Further guidance on keeping the saw in good condition and storing it safely.
Conditions requiring bar maintenance and cleaning methods.
Repeat lubrication procedure for the sprocket.
Keep the work area clean, well-lit, and free of hazards.
Guidelines for safe use of electrical power tools, including plug and cord precautions.
Measures for operator safety, including alertness, PPE, and preventing accidental starts.
Keep body parts away from the chain; proper hand placement and grip for control.
Use safety glasses, hearing protection, and maintain stable footing.
Caution when cutting limbs under tension to avoid spring back and injury.
Explains kickback causes and how to avoid it through proper technique.
Defines the proper applications for the chain saw.
Instructions for fitting the chain and guide bar onto the saw.
Steps for starting, stopping, and checking the chain brake.
Guidelines for making cuts, including grip, footing, and chain speed.
Additional tips for safe handling and operation.
Further guidance on keeping the saw in good condition and storing it safely.
Conditions requiring bar maintenance and cleaning methods.
Repeat lubrication procedure for the sprocket.
The WORX WG305E is an electric chain saw designed for sawing trees, tree trunks, branches, wooden beams, and planks. It can make cuts with or across the grain but is not suitable for sawing mineral materials.
The chain saw operates by means of an electric motor, driving a chain around a guide bar to perform cutting. It features a lock-out button (3) and an on/off switch/trigger (2) for operation. The chain brake (7) is a safety mechanism that stops the chain immediately upon kickback. An oil level window (4) allows monitoring of the chain oil, which is essential for lubrication. The chain tensioning knob (11) facilitates easy adjustment of chain tension.
General
