10
TECHNICAL DATA
Type WG305E (3- designation of machinery, representative of chain saw )
Voltage 230-240V~ 50Hz
Power 110 0 W
Bar length 25cm
Chain speed 8.5m/s
Oil tank capacity 120ml
Chain pitch 3/8”
Number of chain drive links 40
Chain gauge 0.050’’
Saw Chain type ES91VS
Bar type ES100SDEA041
Weight( chain & bar included) 3.1kg
Protection class
/II
NOISE DATA
A weighted sound pressure L
pA
:86dB(A) K
PA
=3dB(A)
A weighted sound power L
wA
:99dB(A) K
WA
=3dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745
Vibration emission value a
h
= 5.5m/s
2
Uncertainty K =1.5m/s²
The declared vibration total value may be used for comparing one tool with another, and may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool can differ
from the declared value depending on the ways in which the tool is used dependant on the
following examples and other variations on how the tool is used:
How the tool is used and the materials are cut or drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and any anti vibration accessories are used.
To Next Page
Loading...
Need help?
General
