Worx WG384E X Series - Page 13

13
Cordless Chainsaw EN
COMPONENT LIST
1. REAR HANDLE
2. ONOFF SWITCH
3. FRONT HANDLE
4. CHAIN BRAKE LEVER HAND GUARD
5. CHAIN
6. GUIDE BAR
7. CHAIN TENSIONING KNOB
8. CHAIN COVER
9. REAR HAND GUARD
10. BATTERY PACK
11. BATTERY PACK RELEASE BUTTON
12. LOCKOUT BUTTON
13. OIL LEVEL WINDOW
14. OIL FILLER CAP
15. BUMPER SPIKE
16. BAR AND CHAIN STORAGE TRANSPORTATION
COVER SHEATH
17. DRIVE SPROCKET
18. BAR PAD
19. FASTENING BAR HOLE
20. BAR LOCATING TABS
21. OIL OUTLET
22. CHAIN DIRECTION SYMBOL
23. BAR TENSIONING PLATE SEE FIG. A2
 Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WG384E WG384E.X WP370E WP370E.X (3 - desig-
nation of machinery, representative of Chainsaw)
WG384E WG384E.X **
WP370E WP370E.X **
Voltage 40V
MAX (2x20V Max.)***
Bar length 35cm
Chain speed 8m/s
Oil tank capacity 150ml
Chain pitch 0.95cm
Number of chain
drive links
52
Chain gauge 1.1mm
Adaptive Chain type
QR: A0 (T)-52E / ES3/8LP.043
52E 90X
Adaptive Bar type
QR: P014-43SR(T) / ES:
ES144SDEA041
Battery type Lithium-Ion
Machine Weight
(bare tool)
3.9 kg
** X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models.
*** Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage is
18 volts.
SUGGESTED BATTERIES AND
CHARGERS
Category Type Capacity
20V Battery
WA3551 2.0 Ah
WA3551.1 2.0 Ah
20V Charger WA3883 4.0 A
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE INFORMATION
A weighted sound pressure L
pA
= 82.5dB(A)
K
PA
= 3.0dB(A)
A weighted sound power L
wA
= 95.8dB(A)
K
PA
= 3.0dB(A)
Wear ear protection.
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined ac-
cording to EN 62841: