Worx WG743 User Manual (English)

Questions and Answers:

Y
ydiazAug 16, 2025
What to do if Worx Lawn Mower doesn’t run when bail handle is activated?
- E
  ecarrollAug 16, 2025
  If your Worx Lawn Mower doesn’t run when you activate the bail handle, check that the safety key is fully installed and the button on the switch housing is completely pushed. Also, release the bail handle to turn the mower off, remove the safety key, turn the mower over, and ensure the blade can turn freely; if not, return it to an authorized servicer. Finally, make sure the battery is fully charged by plugging in the charger and waiting for the green light.
R
Roberto OrtegaAug 22, 2025
Why Worx WG743 Lawn Mower is not picking up clippings with the Grass Collection Bag?
- M
  Matthew GonzalezAug 22, 2025
  If your Worx Lawn Mower isn't picking up clippings with the grass collection bag, make sure to remove the mulch plate when bagging. Check the chute for clogs and clear any grass clippings. If there's too much cut grass, raise the cutting height. Also, empty the bag more often if it's full.
K
kaylaharperAug 25, 2025
What to do if Worx Lawn Mower battery charger LED’s not on?
- R
  Richard RoblesAug 26, 2025
  If the battery charger LEDs on your Worx Lawn Mower are not on, check the plug connection. If that doesn't work, replace the charger.
L
Lynn DavisAug 27, 2025
Why Worx WG743 battery charger LED flashes red and the battery can’t be charged?
- A
  Audrey WallaceAug 28, 2025
  If the battery charger LED flashes red and the battery can’t be charged on your Worx Lawn Mower, the battery may have overheated. Remove the battery from the charger and allow it to cool to 42°C or less.
M
monique17Aug 31, 2025
What to do if the Worx Lawn Mower motor stops while mowing?
- R
  Rebecca BowmanAug 31, 2025
  If the motor stops while mowing with your Worx Lawn Mower, try the following: First, release the bail handle, remove the safety key, and check if the blade can turn freely. If it can't, take it to a service center. Next, raise the cutting height. Also, ensure the battery is fully charged by plugging in the charger until the green light comes on. To prevent overloading, slow down your cutting pace or raise the cut height, or both.
E
Elizabeth RamirezAug 19, 2025
Why Worx WG743 Lawn Mower runs but cutting performance is unsatisfactory?