Worx WG790E User Manual

Programming guide
Control Panel and menu
Programming
After you have successfully installed the Landroid
®
M , it is now ready to be programmed according to your schedule. To program your Landroid
®
M , simply
follow the step by step guide below.
Menu overview
RETURN
Back to proceeding menu
HOMEPAGE
Displays the state of your setting
Select up
Select down
OK
Confirms any setting.
Note: Make sure you
confirm your selection
within 30 secs or the
display will return to
previous menu.
POWER ON/OFF
Turns the Landroid
®
M on and off
NUMBER PAD
Input numbers to set
time, date
HOME
Sends the Landroid
®
M to its
charging base during operation
and activates charging
START
Shortcut key to start mowing.
STOP
To stop the Landroid
®
M during
normal operation and charging.
EN
HOMEPAGE
Language
Time Format
Date Format
Set Date & Time
Rain Start Delay
Auto Work Time
Customize Work Time
Customize Work Area
Enable boundary cut
Change PIN Code
Alarm Level
General Setting
Working Time
Security
Start
To quick start your Landroid
®
M, first press until the Landroid
®
M turns on and input the default PIN 0000, then press .
is the shortcut button to command your Landroid
®
M to start mowing. Press and close the cover to keep working and press and close the cover to make
Landroid
®
M go back for charging and mow the grass near boundary wire at the same time. The Landroid
®
M will work continuously until it’s out of battery and then it will
return to the charging base. Once charging is complete, the Landroid
®
M will automatically resume mowing or if it has finished mowing it will stay in the charging base.
The factory default setting is 800m
2
– refer to the Auto Mowing Time Schedule. if the time is not in the schedule, press START and close cover to start.
If you want to change the working time and other settings, please follow the steps below.
Setting
Press OK to enter the submenu. Use the keys to select General setting, Working time or Security. Then press OK.
1. General setting ( )
Always close the panel cover after
programming, your Landroid
®
M
will not move with it open.
WG790E

Worx WG790E Specifications

General

Type	Robotic Lawn Mower
Cutting Width	18 cm
Cutting Height Range	20-60 mm
Battery Type	Lithium-Ion
Battery Voltage	28 V
Battery Capacity	2.0 Ah
Noise Level	63 dB
Power Source	Battery
Voltage	28 V
Grass Collector Capacity	Mulching/No collector
Charging Time	Approx. 1.5 hours

Summary

Control Panel and Menu Overview

HOMEPAGE Display

Shows the current state of your settings.

Control Buttons

Functions of HOME, START, STOP, POWER ON/OFF, RETURN, OK buttons.

Menu Navigation

Overview of key menu options like General Setting, Working Time, Security.

Setting Options

Details on Language, Time Format, Date Format, Set Date & Time, Rain Start Delay.

Programming Your Landroid®M

Quick Start Mowing

Initiates mowing with a shortcut key.

Accessing Settings

Steps to enter the settings menu.

General Setting Configuration

Adjusting language, time, and date formats.

Setting Date and Time

Manually inputting the current date and time.

Rain Start Delay Setup

Configuring the delay after rain before mowing resumes.

Working Time Configuration

Auto Work Time

Automatic time setting based on lawn area.

Customize Work Time

Manual scheduling of mowing times.

Customize Work Area

Setting zones and time ratios for complex areas.

Enable Boundary Cut

Activating weekly mowing along boundary wires.

Work Time Adjustment

Shortcut to adjust working time in increments.

Security Settings

Change PIN Code

Procedure for changing the security PIN.

Alarm Level Setting

Adjusting the volume of audible alerts.

Function Messages Explained

Mowing Status

Cutting grass according to the set program.

Raining Behavior

Returning to base and waiting for rain to stop.

Charging and Standby

Status during charging or waiting for scheduled time.

Error Messages and Troubleshooting

Territory and Boundary Errors

Outside working area and boundary wire issues.

Operation Blockage Errors

Blade disc, wheel motor, trapped, lifted up, upside down errors.

Power and Connection Errors

PIN code, charging base, and low battery errors.

General Troubleshooting Tips

Advice on resetting errors and common issues.