14
Cordless Lawn Mower EN
18. CHARGE CORD INPUT
19. BATTERY INDICATOR BUTTON
20. SIDEDISCHARGE COVER SEE FIG. D2
21. SIDE DISCHARGECHUTE SEE FIG. D2
22. BATTERY PACK SEE FIG. F1
23. SAFETY KEY SEE FIG. F1
24. BLADE BOLT SEE FIG. R1
25. BLADE SEE FIG. R1
26. SPACER SEE FIG. R1
*Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Type WG761E WG761E.9 (7- designation of
machinery, representative of Cordless Lawn Mower)
WG761E WG761E.9
Voltage 80V Max. (4x20V Max.)**
No load speed 2800 /min
Deck width 53 cm
Cutting width 51 cm
Front wheel diameter
200 mm
Rear wheel diameter
250 mm
Cutting height 20 – 80 mm
Cutting height positions
7
Grass collection capacity
70 L
Battery capacity 4.0 Ah (WA3014) /
Battery type Lithium-Ion
Charger Model WA3974 /
Charger rating Input: AC
100-240 V~50/60 Hz
Output: 20 V , 1 A
(each battery slot)
/
Charging time for a
single battery pack
(approx.)
4.0 Ah 4-5 hrs
/
Machine Weight 35 kg 32.4 kg
** Voltage measured without workload. Initial battery
voltage reaches maximum of 80 volts. Nominal voltage is
72 volts.
Each charging port is independent. The charging time for
four battery packs of the same capacity is equal to the
time for a single battery pack.
ACCESSORIES
WG761E WG761E .9
Battery pack (WA3014) 4 /
Basecamp (WA3974)
(80V Power Source &
Charger)
1 1
Grass collection bag 1
Side-discharge kit 1
We recommend that you purchase your accessories from
the same store that sold you the tool. Choose the type
according to the work you intend to undertake. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
NOISE DATA
A weighted sound pressure L
pA
= xx dB(A)
K
pA
3.0 dB (A)
A weighted sound power L
wA
= xx dB(A)
K
wA
3.0 dB (A)
Wear ear protection.
VIBRATION INFORMATION
Typical weighted vibration a
h
< 2.5 m/s²
Uncertainty K = 1.5 m/s²
WARNING The vibration emission value during actual
use of the power tool can differ from the declared
value depending on the ways in which the tool is used
dependant on the following examples and other variations
on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
Using the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti
vibration accessories are used.
And the tool is being used as intended by its design and
To Next Page
Loading...
