17
PLUG REPLACEMENT
(UK & IRELAND ONLY)
If you need to replace the fitted plug then follow the
instructions below.
IMPORTANT
The wires in the mains lead are colored in accordance
with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains lead of this
appliance may not correspond with the colored markings
identifying the terminals in your plug, proceed as follows.
The wire which is colored blue must be connected to
the terminal which is marked with N. The wire which is
colored brown must be connected to the terminal which
is marked with L.
WARNING: Never connect live or neutral wires
to the earth terminal of the plug. Only fit an
approved 13ABS1363/A plug and the correct rated fuse.
NOTE: If a moulded plug is fitted and has to be removed
take great care in disposing of the plug and severed
cable, it must be destroyed to prevent engaging into a
socket.
Connect
Blue to N
(neutral)
Outer sleeve
Cable grip
Brown L (live)
13 Amp fuse approved
to BS1362
DECLARATION OF CONFORMITY
We,
POSITEC Germany GmbH Konrad-Adenauer-Ufer 37 50668 Köln
Declare that the product,
Description Battery-powered Screwdriver
Type WX255 WX255.1 WX255.2 (250~269
- designation of machinery, representative of
Battery-powered Screwdriver)
Function Tightening and loosening screws, nuts
Complies with the following directives,
2006/42/EC 2011/65/EU
2014/30/EU 2014/35/EU
Standards conform to:
EN 60745-1 EN 60745-2-2 EN 60335-1
EN 60335-2-29 EN 55014-1 EN 55014-2
EN 61000-3-2 EN 61000-3-3 EN 62233
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe) Ltd
PO Box 6242, Newbury, RG14 9LT, UK
Suzhou 2016/06/13
Allen Ding
Deputy Chief Engineer, Testing & Certification
To Next Page
Loading...
