Worx WX261 User Manual

12
Cordless Brushless Impact Driver
EN
one direction. Turn the battery around until it can be
inserted into the slot.
2. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES
Charging time problems, as above, and having not
used a battery pack for a prolonged time will reduce
the battery pack working time. This can be corrected
after several charge and discharge operations by
charging & working with your drill. Heavy working
conditions such as large screws into hard wood will
use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery
pack below 0
o
C (32
o
F) and above 40
o
C (104
o
F) as this
will affect performance.
MAINTENANCE
Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to
clean your power tool. Wipe clean with a dry cloth.
Always store your power tool in a dry place. Keep
the motor ventilation slots clean. Keep all working
controls free of dust. Occasionally you may see
sparks through the ventilation slots. This is normal
and will not damage your power tool.
FOR BATTERY TOOLS
The ambient temperature range for the use and
storage of tool and battery is 0
o
C-45
o
C (32°F-113°F).
The recommended ambient temperature range for
the charging system during charging is 0
o
C-40
o
C
(32°F-104°F).
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.
DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
Declare that the product
Description Battery operated screwdriver
Type designation WX261 WX261.9
(2-designation of machinery, representative of
screwdriver )
Function Tightening and loosening screws, nuts
Complies with the following Directives:
2006/42/EC
2014/30/EU
2011/65/EU&(EU)2015/863
Standards conform to
EN 62841-1
EN 62841-2-2
EN 55014-1
EN 55014-2
The person authorized to compile the technical file,
Name Marcel Filz
Address Positec Germany GmbH
Grüner Weg 10, 50825 Cologne, Germany
2019/10/09
Allen Ding
Deputy Chief Engineer, Testing & Certification
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China

Worx WX261 Specifications

General

Reverse	Yes
Motor type	Brushless
Hanger type	Hanger hook
Handle shape	Pistol handle
Product type	Impact driver
Product color	Black, Orange, Silver
Chuck diameter	1/4\
Adjustable speed	-
Torque (max)	230 N⋅m
Idle speed (max)	3000 RPM
Impact rate (max)	3750 IPM
Power source	Battery
Battery voltage	20 V
Battery capacity	2 Ah
Number of bits	1 pc(s)
Screwdrivers/bits tips included	Hex (imperial)

Weight and Dimensions

Depth	149 mm
Width	83 mm
Height	190 mm
Weight	1040 g