9
Lithium-ion Brushless Impact Driver EN
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Do not expose to rain or water.
Do not burn
Li-I on
Do not dispose of batteries, Return
exhausted batteries to your local
collection or recycling point.
High speed
Low speed
Waste electrical products must not be
disposed of with household waste.
Please recycle where facilities exist.
Check with your local authorities or
retailer for recycling advice.
COMPONENT LIST
1.
FORWARD/ REVERSE ROTATION CONTROL
2. SOFT GRIP HANDLE
3. BELT HOOK
4. BATTERY PACK RELEASE BUTTON
5. BATTERY PACK*
6.
ON/OFF SWITCH WITH VARIABLE SPEED
CONTROL
7. SIGHT LIGHT
8. COLLET LOCKING SLEEVE
9. BIT CLIP
10.
BATTERY CAPACITY INDICATOR*(ONLY
FOR WX292 WX292.1)
*Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type WX292 WX292.1 WX292.9 (2-
designation of machinery, representative of
Cordless Impact Driver)
WX292 WX292.1 WX292.9
Charger voltage 100-240V ~50/60Hz
Rated voltage 20V Max**
No load speed 0-2900/min
Impact rate 0-3200bmp
Max torque 175N.m
Chuck capacity 1/4”
Machine weight 1.44kg 1.7kg 1.05kg
* Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
NOISE INFORMATION
A weighted sound pressure L
pA
: 76dB(A)
A weighted sound power L
wA
: 87dB(A)
K
PA
& K
WA
3.0dB(A)
Wear ear protection when sound pres-
sure is over
80dB(A)
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined
according to EN 60745:
To Next Page
Loading...
