E-6
EQUIPMENT/
SELF-INSTALLATION
To Unlock Volume Control For A Single Device
(Individual Volume Unlock):
1 Assuming Global Volume Lock is active, select a mode on the remote control that
you want to unlock (e.g.,CBL) and press it once. Next, press and hold SETUP until the
device key blinks twice, then release SETUP.
2 Enter 9 - 9 - 3. The last-selected device key will blink twice.
3 Press VOL- once. The last-selected device key will blink four times.
4 Repeat steps 1 through 3 (of this section) for each device you want volume to be
unlocked.
5 Now, after you select a device that has volume unlocked (e.g., CBL), pressing
VOL+, VOL-, or MUTE will control the device’s volume only in its own mode.
To Unlock All Volume Control
(Global Volume Unlock):
NOTE: Performing these instructions will set independent volume control for all
programmed devices.
1 On the remote control, press and hold SETUP until the last-selected device key blinks
twice, then release SETUP.
2 Enter 9 - 9 - 3. The last-selected device key will blink twice.
3 Press VOL+ once. The last-selected device key will blink four times.
To Lock Volume Control To One Mode
(Global Volume Lock):
NOTE: The audio mode’s volume controls are active regardless of Volume Lock
settings. However, if you lock the volume controls to the AUD mode, you will have
control of the audio device’s volume in all other modes (i.e., AUX, DVD, TV, and
CBL).
1 On the remote control, press and hold SETUP until the last-selected device key blinks
twice, then release SETUP.
2 Enter 9 - 9 - 3. The last-selected device key will blink twice.
3 Select a mode (e.g., TV) where you want to globally lock the volume controls. The
selected device key will blink twice.
4 Now,when you press VOL+, VOL-, or MUTE, the volume of the selected device (e.g.,
TV) can be controlled regardless of mode.
To Next Page
Loading...
Need help?
General
