Bulletin # 055
6 Pages
May 10, 2006
REMOVING HYDRAULIC OIL COOLER ON
SPORT and RH MOWERS
*** PRODUCT RECALL ***
Subject: Removal of hydraulic oil coolers on all Sport and RH mowers
Units
Affected: All Sport and RH mowers with a serial number from 24188
through 30058 that have the hydraulic oil cooler. Mowers
beyond this serial number range have been produced to
updated standards according to new design.
Situation: It has been determined that the hydraulic oil cooler for these
mowers is unnecessary for the hydraulic system and that it
should be removed. All mower registrations must be completed
and entered into the Wright online registration system and
communicated to Wright Manufacturing within 20 days of
receipt of this letter. Failure to do this exposes the Dealer to
the liability of consequential damages should a problem
develop with the mower related to the items in this bulletin.
This product recall requires that all affected mowers have
the hydraulic oil cooler removed as quickly as possible
and no later than 40 days from the date of this bulletin. In
cases where the mower has been retailed, the Dealer
should make very effort to accommodate those mowers
into their schedule at the earliest possible date.
We will be contacting all currently registered mower
owners to inform them of the need for this service but
request that each Distributor/Dealer contact their
customers as well. Additionally, we may not have
registration for all retailed mowers which makes it
impossible for us to contact the consumer. In the event
that engine damage occurs due to the consumer not
having knowledge of this recall due to non-registration, the
10
To Next Page
Loading...
