WRIGHT Z EXTREME User Manual

WRIGHT Z EXTREME

32 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operator’s Manual

WRIGHT Z EXTREME

FAILURE TO FOLLOW SAFE OPERATING PRACTICES MAY RESULT IN SERIOUS INJURY OR DEATH.

Read this manual and other manuals that came with your mower before operating.

©1998-23 Wright Manufacturing, Inc. All rights reserved. This material may not be reproduced or copied, in whole or part, without written permission

from Wright Manufacturing, Inc. Grass Gobbler, Gobbler, Leaf Gobbler, Velke, Pro 1, X2, Stander, and Sentar are trademarks of Wright Manufacturing.

Serial # 163268 and higher until superseded

Revised 10/10/23

P/N 79510018

Table of Contents

Questions and Answers:

M
Michael TownsendAug 7, 2025
Why is my WRIGHT Z EXTREME leaving streaks?
- R
  Rachel BradyAug 8, 2025
  Streaking can occur for several reasons. The blades may not be sharp enough (sharpen blades) or they could be worn down too far (replace blades). Ensure the engine RPM is at full throttle while mowing. If you're moving too fast, slow down. Also, check if the deck is clogged with grass and clean it if necessary.
M
Michael McdowellAug 15, 2025
What to do if my WRIGHT Z EXTREME is scalping the lawn?
- J
  Jim LewisAug 15, 2025
  Scalping can happen if the lawn is uneven; consider rolling or leveling the lawn. If the cutting height is too low, raise it. Also, ensure the deck is leveled correctly and that the tire pressure is even.

WRIGHT Z EXTREME Specifications

General

Brand	WRIGHT
Model	Z EXTREME
Category	Lawn Mower
Language	English

Related product manuals