7-7
Engine Manual / Maintenance
It is very important that all users of this machine
read and understand the engine manufactures
Owner’s Manual.
This manual contains:
• safety awareness
• emissions
• oil change intervals
• cleanout intervals
• maintenance
• warranty information that is critical for the care
and safe operation of your engine
Maintenance Interval Chart
Note: this maintenance charts lists the basic engine
items. See the specic engine manufacture’s
manual for detailed maintenance items and warranty
conditions.
Daily Visual
• Check engine oil.
• Check machine for debris and blow o as
necessary.
• Check blades for condition and sharpness.
• Check for loose hardware, controls, and
components.
• Check for signs of oil or fuel leaks.
• Check tires for loss of pressure and wear.
• Check for labels and safety equipment.
Every 500hrs
• Inspect engine cooling ns.
• Replace engine oil and lter. Use only approved
Vanguard oil.
• Check intake air lter and replace as necessary.
Every 1000hrs or Annually/Oseason
• Replace hydro oil in tank and lter. Use only
approved Wright oil and lters.
• Check for idler, belt and spindle wear
• Check caster pivots. Add grease if leaking.
• Check caster wheel bearings. Replace if worn.
• Check fuel hose, tank, and grommets
• Check wiring and electrical components are in
good condition and properly secured
The service intervals indicated are to be used as a
guide. Service should be performed more frequently
as necessary by operating conditions.
To Next Page
Loading...