WRIGHT Z EXTREME - Warning, Safety, and Instructional Decals

5-45-4
Warning, Safety, and Instructional Decals
• Specic safety warning decals are located on the equipment near immediate areas of potential hazards.
• Keep all safety signs legible - Replace worn, damaged or missing safety decals.
• Remove all grease, dirt and debris from safety signs and instructional decals.
• If an attachment or accessory has been installed, make sure current safety decals are visible
Warning symbol. Identies potential
hazards. Follow all recommended
precautions.
Stay away from people and children
during operation.
Read Operator’s Manual. Do not
operate machine if you are not trained.
Engage hand brake.
Use eye and hearing protection. Engine speed control.
Identies hazards to hands and feet.
Pull switch to engage blades (PTO)
Push switch to disengage blades (PTO)
Thrown object hazard. Let machine cool prior to refueling.
Inspect work area for objects that can
be thrown or impacted.
Stop blades, place controls in neutral,
and engage brake before discmounting
machine.
Keep cutter deck opening covered or
the chute down while operating.
Fire hazard.
Ignition: O󰀨, On, Engage brake to start.
Keep debris o󰀨 machine at all times.
Before servicing engine, remove the
key and read operators manual.
Keep hand on brake when disengaging.
Do not operate on steep inclines. Hot Surface. Stay away.
Do not operate near dropo󰀨s or water.
Sit down machines: do not mow with
the ROPS down.
Operate slowly on any incline. Identies lift points of the machine.
Entanglement Hazard. Do not step on this part of the machine.
Keep away from moving parts. Seat suspension adjustment.
Keep shields and guards in place.
Do not tow heavy implements with this
machine.