ENGINE
L3301, L3901, L4701, WSM
1-S38
Front Axle Frame
1. Remove one of two engine hooks attached on the flywheel side
of engine and install it on left side of the engine.
2. Hold the engine by using hoist and engine hooks (1).
3. Remove engine mounting bolts.
4. Separate the engine from front axle frame (2).
L3301/L3901
L4701
9Y1211012ENS0029US0
Tightening torque
Front axle frame mounting
bolt (M10)
77.5 to 90.2 N·m
7.9 to 9.2 kgf·m
58 to 66 lbf·ft
Tightening torque
Front axle frame mounting
bolt (M10)
60.8 to 70.6 N·m
6.2 to 7.2 kgf·m
45 to 52 lbf·ft
Front axle frame mounting
bolt (M12)
103.0 to 117.7 N·m
10.5 to 12.0 kgf·m
76 to 86 lbf·ft
(1) Engine Hook (2) Front Axle Frame
To Next Page
Loading...
Need help?
General
