Wulfsberg Electronics P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A Page 27 of 37
• The following illustrates the display with an OTAR in progress.
The OTAR process will automatically time-out after 2 minutes of unsuccessful OTAR attempts.
At anytime during the OTAR operation, or after the OTAR has completed, whether successfully or unsuccessfully,
the user must press the OTAR or HOME key to cancel/exit the OTAR operation. Doing so shall display the OTAR
cancel confirmation page, as depicted below. This page functions identically to the OTAR start confirmation page.
NOTE:
You can always get back to the HOME PAGE by pressing the HOME
button one or more times.
To Next Page
Loading...
