Wulfsberg Electronics P-2000 and C-2000/RT-2000 Operator’s Manual
Document 150-041102 Revision A Page 4 of 37
Transceiver Overview
The Wulfsberg 2000 family of radio products is a group of FM Tactical transceivers that incorporate one or two
transceiver modules and control functions into a single panel mount unit (P-2000) or a panel mount control head
(C-2000) and remote mount RT-2000 Transceiver.
Part number variations of the unit exist for any combination of
the following frequency bands: 138-174 MHz, 403-470 MHz, 450-520 MHz, and 806-870 MHz. Each transceiver
module, with the exception of the 806-870 MHz band, can transmit with either 1 or 10 watts transmit power. The
800 MHz unit produces either 1 or 3 watts transmit power. The P-2000 can operate by itself or in conjunction with
the C-2000 control display acting as a remote slave control. Input voltage is 28 volts DC and the keypad is backlit
from either 28VDC, 5 VDC or 5 VRMS AC.
The Wulfsberg C-2000 is a control display unit that can be used as a slave control head with a P-2000 panel mount
transceiver, or as either a primary or slave control head for the RT- 2000 remote transceiver. Versions of the
C-2000 include black faceplate and options for either Standard or NVG compatible displays. Input voltage is 28
volts DC and the keypad is backlit from either 28 VDC, 5 VDC or 5 VRMS.
The Wulfsberg RT-2000 is a remote mounted transceiver that incorporates one or two transceiver modules in a
remote mounted unit. It must be controlled by at least one C-2000 control head. Additional C-2000's can be added
to the system for multi-positional control of the transceiver.
The P-2000 or C-2000/RT-2000 systems operate identically with the exception of the PC/Keyloading interface. For
a P-2000 the interface is located on the front of the P-2000. In a C-2000/RT-2000 system, the connector on the
RT-2000 is used for PC/Keyloading functions. The connector on the C-2000 is not currently used.
For the purposes of this operator’s manual the use of the phrase “P-2000” will be used to cover
both P-2000 and C-2000/RT-2000 systems.
NOTE:
To Next Page
Loading...
