8
Mains voltage [V AC] 110 - 230 V
Mains voltage tolerance +/-15 %
Mains frequency 50/60 Hz
Max. open circuit power consumption 1.5 W
Nominal output 48 W
Charging voltage [V DC] / Test voltage 12 V
Arithmetic charging current [A DC] at 230 V 4.0 A
R.M.S. current [Aeff. DC] *) 6.0 A
Battery capacity 3 -200 Ah
EMV Class EN 61000-6-3 (Class B)
EN 61000-6-1
FCC 15 Class B
Chargeable cells 6
On-time 100 %
Charging characteristic IUoU
Degree of protection **) IP30
Operating temperature ***) -20°C to +50°C
-4° F to 122° F
Storage temperature -25°C to +80°C
-13° F to 176° F
Length of time before the safety cut-out trips: 56 h
*) R.M.S. current corresponds to the specifications for conventional battery chargers
NOTE! For indoor use only, do not expose the charger to rain or snow
***) at higher temperatures a drop in performance may occur (derating)
The proper functioning of the charger is tested at 5-85% humidity
Component specification: Climate class B
Technical data
Acctiva Easy 1206
**)
Read manual before charging.
Beware!
Explosive gases occur while charging.
Battery acid is caustic.
For use indoors.
Do not expose to rain.
Ensure good ventilation while charging
Avoid flames and sparks while charging.
Symbols on
rating plate
These symbols will also be found on the rating plate in addition to the safety symbols
To Next Page
Loading...
