13
3 If a low voltage is already present at the personal protection switch when the
device is plugged in, this is signalled by a quick red ashing of the signal unit
(provided the voltage is high enough).
3 The personal protection switch does not switch ON.
3 If a low voltage
and the signal unit lights up in RED.
3 The maximum possible personal protection is provided.
3 If an overvoltage is already present at the personal protection switch when the
device is plugged in, this is signalled by the alternating 4x red ashing and 1x
green ashing of the signal unit.
3 The personal protection switch does not switch ON.
3 If a low voltage
unit comes on and remains a steady RED.
3 The maximum possible personal protection is provided.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
-
chase through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop.
Subject to technical changes without prior notice.
We accept no liability for printing errors.
Spare parts
If, despite careful manufacturing and testing pro-
cesses, the device should become faulty, have the
repair carried out by a Würth masterService®
station.
.
With any enquiries or spare parts orders, always
quote the item number as given on the device type
plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsman-
ager. Alternatively, contact your local Würth agency
for a hardcopy.
Environmental instructions
Do not dispose of this device with
household waste. Dispose of the
device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
To Next Page
Loading...