Step 6 -Cleaning the filter
Email：support@wybotpool.com Facebook: @WybotPool Website: www.wybotpool.com
Step 4 -Submerging the device Step 5 -Removal from the pool
Submerge the device into the pool
gently.
9 10
Wait for the device auto-calibration
for 15 seconds.
LED turns flashing blue and start
to clean.
14 15
Store the cleaner in a ventilated
place and keep it out of direct sun-
light or inclement weather.
Charge the device at least every
3 months to maintain battery per-
formance during the offseason.
11 12 13
Auto park by the wall when
completing cleaning.
Insert the included hook
into a standard pool pole.
Hook it out of the pool. You should clean the filter after
use.Insufficient cleaning may inf-
luence pool cleaning effect.
Quick Start Guide WYBOT A1(OS2010)
a
b
c
d
If you have set a cycle other
than the defaut, you should
leave the robot in the pool to
complete whole cycle.
Document No. G2024201001
To Previous Page
Loading...
