16
B. Bare bone unit without writer installed
1. Unpack the package of duplicator.
2. Prepare the CD/DVD-ROM and CD/DVD writers
according to the device recommendation in this manual
and refer to the Part A above for installation. Please
check for list compatible writers if needed.
3. Check the entire unit. Return it if there is any
mal-function or damage found.
4. Assemble the duplicator according to your need.
5. Make sure that the voltage setting is correct.
6. Customers can purchase the optional Wytron USB 2.0
module that enables you to link one of the writers in the
duplicator to PC for external usage.
C. Completed duplication system
1. Unpack the package of duplicator.
2. Check the entire unit. Return it if there is any
mal-function or damage found.
3. Make sure that the voltage setting is correct.
4. Customers can purchase the optional Wytron USB 2.0
module that enables you to link one of the writers in the
duplicator to PC for external usage.
To Next Page
Loading...