WYTRON MagicCD Series - Load Nonblank Disc (if HDD Installed); CDDA Load Speed (if HDD Installed); Language (for DVD-6 Xx Series Only)

40
6.1.27 Load Nonblank Disc (if HDD installed)
This setting is mainly for Autoloader and controls the
loading of non-blank disc in any writer. If setting is “Yes”,
whenever there is a non-blank disc detected by the writer,
the duplicator will go to “Load” function automatically and
start loading the data from that non-blank disc into current
partition of hard drive. Through this function, you can
control the Autoloader to copy multi-master discs fully
automated. Press MODE to change setting and GO to exit.
6.1.28 CDDA load speed (if HDD installed)
Normally, when reading music track, the CD/DVD-ROM
drive will automatically lower the reading speed significantly.
Unstable reading situation may happen if we use the
maximum speed of CD/DVD-ROM drive to read music track.
This will affect the quality of music CD/DVD duplicated. This
setting change the speed of music track loading to enhance
stability of music track reading. Default setting is “AUTO”.
Press MODE to change the setting and GO to exit.
6.1.29 Language (for DVD-6xx series only)
There are several languages built-in for menu displaying
and you can switch it by this function to match your
requirement accordingly. The default setting is “English”.