20
only one target.) or neither there is any limitation on
sequence of writer to start with. In other words, you may
copy one disc only by using any one of the writers
randomly.
b. When Copy is completed, the passed discs will be ejected
automatically (Default setting: discs passed will be
ejected. This can be changed according to your need).
For continuous duplication, place additional blank discs
into the writers and repeat the above procedures.
c. Failed disc(s) will remain in respective writer(s) (Default
setting: Failed discs will NOT be ejected. This can be
changed according to your need). Press MODE switch
will eject those failed discs from writers or press each
eject button on the writer to eject disc manually.
3. Explanation of messages shown during operation:
Copy AB234M14:23 If CD writer installed
C0036+25 32x24 00:38
Copy: Current function
AB234M24:32: AB partition with 234MB data, 24:32 in total
C0036+25: Copy to 36MB and 25MB data in memory buffer
32X24: Set 32X write speed and 24X current write speed
00:38: Total elapse time
Copy AA4234M DVD If DVD writer installed
C1248+31 8x 4 01:06
Copy: Current function
AA4234M DVD: AA partition with 4234MB data for DVD
C1248+31: Copy to 1248MB, 31MB data in memory buffer
8X 4: Set 8X write speed and 4X current write speed
01:06: Total elapse time
To Next Page
Loading...