UbONE
X-Driven
12
How to Change the Setting
1
2 3 4 5
1
Event Recording is set as either Single-Mode or Multi-Mode.
Single-Mode: When an event occurs, it only records the event image and then
the mode is changed back to standby. However, pressing the Emergency But-
ton resumes recording.
(This mode is to prevent data deletion due to memory shortage and to pre-
serve the recorded images.)
Multi-Mode (Default Mode): Unlike Single Mode, it saves the files whenever an
event occurs. However, when the space of SD memory card is insufficient, the
oldest file is deleted to save a new file.
*Disk Partition for Events
Within a limited space of SD memory card, it can assign a certain capacity to
store event files. Default : 50 (20~50)
2
Open a file to see (the) image stored in a certain location.
3
Save the opened image as another name.
4
Capture an image and save it as a BMP file. It also includes a function to save
the title and memo when saving it as a picture file.
5
Print the current screen.
Storage space
Normal Recording (50%) Event Recording (50%)
Storage space for normal recording
files and event recording files is set
to be same.
To Next Page
Loading...