Congratulations on choosing and purchasing
this X-PULSE Amplifier. This exceptional car
audio amplifier is the result of a combination of
advanced switching technologies applied to
the field of car audio amplification.
All three new X-PULSE amplifier models com-
bine the most comprehensive performance
data and controlling features accomplished in
the car-audio electronics field!
X-PULSE KEY FEATURES
✔ High Power Output
✔ High Damping Factor
✔ High Efficiency
✔ Fully regulated PWM-Power Supply
✔ Temperature-controlled Micro-Fan for
1-Ohm stability of each channel
✔ Low Heat Generation
✔ Compact Dimensions
✔ Relatively Low Power Consumption
✔ Versatile Controlling Options
State-of-the-Art Switching Technology
Class-D Amplification is ideal for the bass fre-
quency range.
The major advantage of the digital amplifier
switching technology is based on the virtually
loss-free amplification combined with an
exceptionally high efficiency. The outstanding
efficiency guarantees that over 90% of the
electrical power drawn from the battery - or
generated by the alternator - is actually trans-
formed directly into amplifier output power and
is not lost in the form of unnecessary waste
heat generation, as encountered with all tradi-
tional analogue amplifier switching technolo-
gies.
In fact the minimised power 'wasting' with
digital amplifier switching technology is surely
a desirable side effect, as conventional ampli-
fiers also require a certain heatsink area that
is usually increasing proportionally with the
output power capacity of the amplifier.
Therefore - as there is hardly any power loss in
the form of waste heat with digital switching
technology - it is possible to keep the dimen-
sions of the amplifier housing considerably
more compact.
Analog Amplification is still the best way to
drive component or fullrange speakers (satel-
lites), because of its greater bandwidth, finer
resolution, higher transparency and its exten-
ded dynamic range.
The same special care, that has gone into the
designing and engineering of these unprece-
dented switching technologies, has also gone
into the selection of the electronic components
incorporated in the X-PULSE amplifier line.
Top-quality components, advanced SMD
(Surface Mounted Device) equipped PCB’s and
a meticulous quality control, guarantee outs-
tanding audio performance, maximum stability
and a long trouble-free product life.
INTRODUCTION &
FEATURE DESCRIPTION
18
Ne2 XP6004/7005/8001 RZ (D+UK) 16.08.2000 6:32 PM Seite 18
To Next Page
Loading...
General