X10 WM100 - App - Organizing Rooms; Room-Based Device Organization; Creating and Adding Rooms

App - Rooms 12 Model WM100
App – Rooms
o Rooms – Rooms allows you to organize your devices by room. This also enables you to
use the “ALL ON” or “ALL OFF” command for a certain room instead of across all your
devices.
o Add Room
 To add a new Room, select the “Add Room” button in the
lower left of the Rooms tab.
 Give the new Room a name (up to 16 characters) and hit the “Save” button in
the upper right. This will create the room and take you back to the Rooms page.
 Now select the Room you just created to go into its configuration page.
 In the lower left is a new button “Add Device”. Select this to
add devices to this room.
A list of all your devices will
show up.
Once you hit the circle to add
a device, it will add it to the
room and disappear from the
list.
Do this to as many devices as
you would like in the room.
When finished, hit the “Back”
button in the upper left.