To Next Page

To Previous Page

When you turn on the pedal control for talk mode

1. When the system connects with 2pcs door station, under standby mode, step on the pedal control

switch to monitor Door 1. Step again to monitor Door 2. Step it third time and the room station

will enter into standby mode.

2.When the system only connects with 1pc door station, under standby mode, step on the pedal

control switch to monitor door station, step again the room station and will enter into standby mode.

3.When door station rings, step on the pedal control switch to talk, step again to stop talk and go back

to standby mode.

10.2 Room Number Setup

Under system setup interface, choose ROOM NO., touch to confirm, then you are able to setup

room number between 2/3/4.

Calling from 1 door (the outdoor unit)

Calling from 2 door (equipped with the calling device)

Note: Please make sure every room has its own room number to avoid confliction.

10.3 Ringtone Setup

Under system setup interface, choose MUSIC SET, touch to confirm, then you are able to setup

ringtone/ringing volume/ringing time.

A. Ringtone

Ringtone for Door1/Door 2: Under Music Set interface, choose MUSIC CH1 or MUSIC CH2, and

touch to confirm, then you are able to choose your favorite ringtones.

Storage Help

2ND / PEDAL CTRL

ROOM NO. SET

MUSIC SET

TIME 20XX/01/01 01:00

RESET

LANGUAGE ENGLISH

2ND

2 3 4