Operation
Operation
12
13
7.Talk Volume Adjustment
During talk, touch to adjust the talk volume and save automatically, which has 9 levels of
adjustment.
8.Extension Switch
Under standby mode, touch and hold until the unit sounds “DI”,
meanwhile mute LED flashes, it means the extension switch
is triggered. The switch will be automatically turned off after the
setting time.
Note: 1. You need to connect with an external device to achieve the extension switch function.
2. Refer to Operation 9.6 for extension switch time.
9.Function Setup
Under the main menu interface, touch / to choose FUNCTION, then touch to enter into
function setup interface.
Outer device
E705FC/E706FC-T-W100
POWER
AWAY
MUTE
KEY
OPEN
CCTV
AUX.
SET
SET
SOUND
TIME
TIME
TIME
OFF
OFF
ON
3S
MANUAL
3S
Storage Help
OFF ON
4.2 Monitor CCTV Camera (Optional)
Under standby mode, touch and hold to monitor CCTV1. The monitoring channel would be
CCTV1/CCTV2/CCTV1 when you repeatedly touch the button.
Note: 1. Refer to Operation 9.5 for CCTV surveillance period.
2. Under monitor mode, the icon indicates to take photo, icon indicates to review picture.
The function is invalid.
5.Unlock
When the room station is talking with door station, touch to open the door.
(Refer to Operation 9.4 for unlock time.)
6.Intercommunication
When monitor A wants to call monitor B, touch and hold and the screen will display the room
number (repeatedly touch or / to choose monitor B number), then touch to call.
Touch to exit if call failure.
Note: When you see the room number on the screen after touching , you only have 10secs to operate the
next step, or the unit will go back to the standby mode automatically.
To Next Page
Loading...
Need help?
General