Operation
Operation
16
17
Note: Please stop monitoring CCTV camera within 24h when you setup the item manually off.
9.6 Extension Switch Time
Under function setup interface, choose the “AUX. TIME” item by touching , then touch
to setup the extension time between 3/10/20/30s. The unit is defaulted to 3s.
Storage Help
AWAY
MUTE
KEY
OPEN
CCTV
AUX.
SET
SET
SOUND
TIME
TIME
TIME
OFF
OFF
ON
3S
MANUAL
3S
MANUAL
10M
12H
10.System Setup
Under main menu interface, touch / to choose SYSTEM , then touch to enter into
system setup interface.
nd
10.1 2 Door Calling / Pedal Control for Talk (Optional)
nd
2 calling and pedal activity follows the outer switch.
Under system setup interface, choose 2ND/PEDAL CTRL, touch to confirm, then you are able to
nd
choose turn on 2 door calling or pedal control for talk.
nd
Note: 1. The 2 door calling and pedal control for talk function cannot be opened at the same time.
nd
2.The factory setting is defaulted to turn on 2 door calling function. But you need to connect with a
Calling switch to reach this function.
nd
When you turn on 2 door calling mode
nd
1. When the room station is under standby mode, it will sound the ring tone when 2 door calls.
2. When the room station is under talk or monitor mode, it will not sound the ring tone but with
icon
Storage Help
AWAY
MUTE
KEY
OPEN
CCTV
AUX.
SET
SET
SOUND
TIME
TIME
TIME
OFF
OFF
ON
3S
MANUAL
3S
3S 10S 20S 30S
Storage Help
2ND / PEDAL CTRL
ROOM NO. SET
MUSIC SET
TIME 20XX/01/01 01:00
RESET
LANGUAGE ENGLISH
2ND
1
PEDAL2ND
To Next Page
Loading...
Need help?
General