Need help?Do you have a question about the Xantrex Freedom Marine Series and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Dimensions | Varies by model |
| Weight | Varies by model |
| Output Voltage | 12/24V DC |
| Battery Type | Flooded, Gel, AGM |
| Number of Banks | 3 |
| Protection Features | Overload, Overvoltage, Short Circuit, Reverse Polarity, Over Temperature |
| Certifications | ABYC |
| Model | Freedom Marine Series |
| Input Voltage | 120/240V AC |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
Describes protection against overloads, short circuits, and over-temperature.
Explains front panel buttons and LED status indicators for operation.
Describes how to operate the unit in Invert and Charge modes using front panel switches.
Provides guidance on calculating battery bank size based on amp-hour ratings.
Explains the process of completely charging wet cell batteries and charger design.
Outlines the three main stages: Bulk, Acceptance, and Float Charge.
Describes the manually initiated equalizing charge for battery rejuvenation.
Lists critical warnings and precautions for performing an equalizing charge.
Table showing voltage settings for various battery types and temperatures.
Covers crucial safety warnings for installation, including electrical shock and fire risks.
Essential considerations for mounting the unit and ensuring proper clearance and ventilation.
Critical warning about connecting DC cables with reverse polarity, which voids the warranty.
Strong warning against connecting AC power to the inverter output, which causes damage and voids warranty.
Explains chassis grounding and neutral bonding for safety and code compliance.
Guides on routing and connecting AC input and output wires, including wire gauge requirements.
Essential checks before powering up the unit, including confirming settings and polarity.
How to test for and correct backfeed conditions to prevent damage.
Table detailing LED status combinations and their corresponding operation states and notes.
Guides for diagnosing and resolving common problems like no inverter output or low voltage.
To Next Page