Need help?Do you have a question about the Xantrex Freedom XC 1000 and is the answer not in the manual?
General| Output Power | 1000 W |
|---|---|
| Input Voltage | 120 VAC |
| Output Voltage | 12 VDC |
| Surge Rating | 2000 W |
| Input Frequency | 60 Hz |
| Battery Type | Lithium |
| Charging Stages | Multi-stage |
| Protections | Overload, Over temperature, Short circuit |
| Cooling | Temperature-controlled fan |
Details limitations and disclaimers regarding the accuracy and use of documentation.
Provides contact details for customer service and technical support.
Section to record serial number, product number, purchase date, and purchased from.
Defines the manual's purpose, scope, intended audience, and lists abbreviations.
Explains DANGER, WARNING, CAUTION, and NOTICE for hazard communication.
Covers essential safety guidelines for using the inverter/charger, including wiring and handling.
Details hazards like burn from short-circuit current, fire, and explosion from vented gases.
Addresses fire and burn hazards related to unit placement and ventilation.
Provides FCC/ICES Class B compliance details and measures to correct interference.
Overview of the inverter/charger's design, purpose, and intended applications.
Lists package contents and highlights core features like power output and transfer switch.
Describes backup capability, comprehensive protection, transfer speed, and overload management.
Covers charging algorithms, ignition control, and configurable output settings.
Explains the 30A transfer relay and power share features for managing AC loads.
Details the AC/DC, display, and side panels, including their components and functions.
Describes the AC/DC and GFCI panel features, terminals, and grounding lug.
Identifies the LCD screen, status LEDs, and function buttons on the display panel.
Details side panel components, wiring compartment cover, and grounding lug.
Covers pre-installation checks, codes, tools, materials, and basic design considerations.
Guides on connecting AC input/output wires and DC cables, including grounding.
Details choosing a location, mounting the unit, and performing installation tests.
Provides guidelines for marine installations, including drip shield installation.
Explains the display panel, status LEDs, function buttons, and LCD screen icons.
Explains operation in Battery/Grid modes, viewing info, and adjusting configuration settings.
Explains how the unit operates in Battery/Grid modes and how to turn it on/off.
Details battery charging stages, equalization, and operating limits.
Outlines periodic maintenance tasks for keeping the unit operating properly.
Steps to take before contacting customer service, including checking error codes and system conditions.
Explains warning messages, audible alarms, and error codes displayed on the LCD screen.
Guides on common problems, possible causes, and solutions for no output voltage.
Summarizes physical, environmental, system, and regulatory specifications for the Freedom XC.
To Next Page