Maintaining the Freedom XC Unit
70 Freedom XC Owner's Guide
Maintaining the Freedom XC Unit
WARNING
ELECTRICAL SHOCK HAZARD
Turning the Power k button to Standby does not disconnect DC
battery power from the Freedom XC. You must disconnect from all
power sources before working on any circuits connected to the unit.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
Periodically you should:
n With all sources of power off, clean the exterior of the unit
with a damp cloth to prevent the accumulation of dust and
dirt.
n Ensure that the DC cables are secure and fasteners are
tight.
n Make sure the ventilation openings are not clogged.
To Next Page
Loading...
Need help?
General
