Need help?Do you have a question about the Xantrex TR2424-120-60 and is the answer not in the manual?
General| Model | TR2424-120-60 |
|---|---|
| Input Voltage | 24 VDC |
| Output Voltage | 120 VAC |
| Output Power | 2400 W |
| Frequency | 60 Hz |
| Efficiency | 90% |
| Waveform | Pure Sine Wave |
| Type | Inverter |
| Surge Power | 4800 W |
Explains the manual's goal of providing installation procedures for the Trace Series Inverter/Charger.
Outlines the manual's content, including safety guidelines, planning, and setup.
States the manual is intended for use only by qualified installers.
Describes the manual's structure: two chapters and one appendix.
Explains symbols like WARNING, CAUTION, and Important notes for clarity.
Details how different Trace Series models are identified and referenced.
Lists common abbreviations and acronyms used throughout the manual.
Directs users to the Xantrex website for additional product details.
Covers essential safety rules for installation and operation of the inverter.
Details DC and AC wiring requirements and electrical code compliance.
Details hazards related to batteries, ventilation, and working with them.
Information on FCC compliance, usage restrictions, and certifications.
Steps for verifying all parts are present after unpacking the inverter.
Importance of planning location, mounting, and ventilation before installation.
Guidelines for choosing an appropriate, safe, and accessible installation site.
Instructions for mounting the unit and ensuring adequate airflow.
Lists necessary tools and hardware for the installation process.
Discusses wiring practices, cable sizing, and grounding methods.
Requirements for electrical panels, breakers, and battery bank configuration.
Importance of battery temperature and basic system layouts.
Guidelines for using generators as an AC input source.
Instructions for securely mounting the inverter unit to a wall.
Covers DC wiring, grounding, batteries, and over-current protection.
Details battery types, cable gauge, and length recommendations.
Explains DC disconnects, over-current protection, and cable connections.
Details AC wiring, input/output, and configurations.
Illustrates on-grid, generator, and off-grid AC wiring setups.
Instructions for connecting two inverters in series for higher voltage output.
Covers DC/AC wiring for stacked units and start-up procedures.
Technical data and parameters for the 120 Vac/60 Hz models.
Technical data and parameters for the 230 Vac/50 Hz models.
Physical, environmental, and compliance data for all models.
To Next Page