Need help?Do you have a question about the Xantrex Trace C40 and is the answer not in the manual?
General| Brand | Xantrex |
|---|---|
| Model | Trace C40 |
| Category | Controller |
| Language | English |
Details how the controller functions as a PV charge controller.
Explains the controller's function in diversion control mode.
Details the controller's operation as a DC load controller.
Guidelines for physically mounting the C-Series controller.
Instructions for connecting the controller to the system.
Specifies the minimum wire gauge required for the controller.
Details wiring for PV charge control mode.
Details wiring for diversion control mode.
Details wiring for DC load control mode.
Explains how to configure the controller using jumpers.
Configuration of automatic/manual equalization and low voltage reconnect.
How to set the controller's operating mode using a jumper.
Setting the system voltage using the voltage selection jumper.
Adjusting bulk and float charging voltage parameters.
Details on how to perform battery equalization.
Explanation of the three-stage battery charging process.
Voltage configurations, PV OCV, load current, breaker/wire size, and short circuit current.
To Next Page
