Need help?Do you have a question about the Xantrex Trace C60 and is the answer not in the manual?
General| Brand | Xantrex |
|---|---|
| Model | Trace C60 |
| Category | Controller |
| Language | English |
Adhere to electrical codes, read all instructions, and avoid environmental exposure to liquids.
Use insulated tools and remove jewelry when working with electrical components.
Be aware of multiple live circuits; product contains no user-serviceable parts.
Wear eye protection, never work alone, use proper lifting, and handle identical batteries.
Install in vented areas, connect batteries first, then controller, and prevent short circuits.
Handle electrolyte exposure with soap and water; recycle batteries properly.
Regulates PV array charging using PWM, with LED status indicators.
Manages battery charging from alternative sources, diverting excess power.
Protects against high temperatures and current overloads via transistor monitoring.
Disconnect power before wiring; set voltage jumper correctly.
Procedure for connecting PV array positive/negative and battery positive/negative.
Connect DC source to battery, battery terminals, and diversion load.
Connect battery terminals and DC load to controller's PV POS/LOAD and COMMON NEGATIVES.
Use potentiometers and sticker for correct LVR/LVD calibration.
Warnings for specific battery types; only for vented lead-acid batteries.
Provides a two-year warranty against defects in materials and workmanship.
To Next Page
