Need help?Do you have a question about the Xantrex Trace TM500A and is the answer not in the manual?
Essential safety warnings and guidelines for product installation and operation.
Specific safety guidelines and precautions for working with batteries.
Describes the TM500A battery status monitor and its capabilities.
Details the process of unpacking the TM500A and checking included components.
Lists tools required for installation.
Key considerations before beginning the installation process.
Step-by-step guide for surface mounting the TM500A unit.
Instructions for flush mounting the TM500A, including cutting an opening.
Information on using appropriate wire gauge for long-distance TM500A installations.
Instructions for mounting and wiring the Deltec shunt.
Procedure for attaching the shunt circuit board to an existing shunt.
Steps for connecting the shunt communications cable and fuse.
Covers initial setup and restoring factory default configurations.
Procedure for adjusting individual system parameters like efficiency and amp hours.
Configuring the CHARGED indicator trigger conditions: voltage only, voltage/amperage, voltage/time.
Setting the low-voltage alarm threshold and its behavior.
Explains the TM500A's buttons, indicators, and LED display elements.
How to select and interpret basic meter readings (Volts, Amps, % SOC, Amp Hours).
Accessing and using data monitors like Days Since Full and cumulative amp hours.
Setting up amp-hour reminders and managing low-voltage and charged indicators.
Details the terms, duration, and conditions of the product warranty.
To Next Page
General
