Programming
The system has two areas of programming; Phone (extension) and System.
The Phone Setup programming parameters only affects the extension that is
doing the programming; whereas, the system programming parameters
affect the whole system.
From an Idle telephone press the program button
Press the center navigation key to select “Phone Setup” and then scroll
through the phone programming.
Extension parameters such as the voicemail OGM will remain for up to 120
seconds when an extension is unplugged or being relocated. To relocate an
extension simply unplug it and plug it into another extension port.
Note: Extensions appear busy to all other extensions when they are in Programming or
reviewing caller ID.
To Next Page
Loading...
Need help?
General
