35
Switching On and Off
The lamp’s illumination is controlled only by pressing
the power switch.
1. Press the power switch
and the single LED will be
turned on.
2. Press the power switch a
second time the Single LED
will be turned off.
Swinging the lamp head
Your LED work light has a swivel
head that can be rotated to the
desired position. To change
the position of the head, simply
rotate the head to the appropriate
position. A detent system will
hold the head steady.
Globe replacement
The LED used in this torch has a life of 30,000 hours
and should not require replacement.
To Next Page
Loading...