EasyManua.ls Logo

Xenosys L2S15 - BASIC TROUBLESHOOTING; Troubleshooting Guide

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Portable LED HeadLight System (L2S15) www.xenosys.co.kr
19
BASIC TROUBLESHOTTING
Symptom
Check Point
Troubleshooting
No light comes from LED
lens module
Check if the battery pack is
properly installed.
Assemble the battery pack
properly to charging terminal.
Check if the battery is
discharged.
Recharge the battery.
Check if the cable
connection is properly
installed.
Connect properly again.
Light comes on a few
moments and turn off
Check the battery remaining
quantity
Recharge the battery
After exchange of
battery, the light intensity is
not enough
Check the intensity is
properly adjusted.
Adjust the intensity step.
Discharging time is too fast
Check if the battery is fully
charged. (Check the battery
remaining LED)
If the battery running time
Is too short even fully
charged, we recommend
exchanging with new battery
as it is expendables.
Light flickers intermittently
Check the wire connection
part loose contact or not.
Contact the distributor or
manufacturer

Related product manuals