Xenosys L2S15 - STORAGE CONDITIONS; Operating and Storage Environment

Portable LED HeadLight System (L2S15) www.xenosys.co.kr
25
STORAGE
1. Maintain the following conditions for storing main products & components.
Environment for Operating & Storage
Ambient Temperature
10℃ ~ 40℃
Relative Humidity
RH30% ~ 85%
Pressure
860 hPa ~ 1060 hPa
Environment for Transportation & Storage (Non-operating)
Ambient Temperature
10℃ ~ 40℃
Relative Humidity
RH30 ~ 85%
Pressure
860 hPa ~ 1060 hPa
- External box marking will be as follows.
2. Do not pull out, twist, nor bend excessively the power cord.
3. Wind up the power cord loosely, and store it by using the rubber bandage or cable tie.
4. Do not expose the main body to excessive shock, direct ray of light and high temperature
which may cause the defective reason.
5. Caution for battery storage: As Li-ion battery is small-sized with high power, if it is stored
fully charged condition for a long time, the battery lifespan can be reduced.
① Store it under half-charged condition in case of non-use immediately.
② Store the battery with separated from the main body in case of long-time no use.
③ Recommend to keep it in the dry condition with ambient temperature range of +15℃ ~
+25℃. Keep away from too hot or extremely cold places.