To Next Page

To Previous Page

Page 18

Part Number: 45051581

8 Optionally, set one or more of the following options under the Finishing bar:

•Creep Adjustment

•Back Cover

•Front Cover

•Cover Source

9 Click OK to close the Properties window.

10 Set the number of copies.

11 Click OK to submit the job for printing.

Printing a booklet from Mac OS X v10.4

On Mac OS X v10.4, the printer driver constrains some selections if an incompatible setting

is selected. For example, you cannot select any Booklet Maker settings unless you ﬁrst set the

Duplex option to Top-Top.

Booklet printing requires that a ﬁnisher is installed on the printer and that the printer driver is

conﬁgured with the installed ﬁnisher. For information about conﬁguring installable options,

see Printing from Mac OS.

The following procedure explains how to set the correct print options for printing an 8.5x11

document as a booklet on 11x17 paper, or for printing an A4 document as a booklet on A3

paper, using the Mac OS X v10.4 printer driver.

TO PRINT A BOOKLET FROM MAC OS X V10.4

1 Open the document in the application.

2 Select File > Page Setup.

3 Choose the Fiery EXP4110 as your printer, set the Paper Size to 8.5x11 SEF (A4 SEF), and

then click OK.

4 Select File >Print.

5 Choose the Fiery EXP4110 as your printer and choose Printer Features from the drop-down

list.

6 Choose Paper Source 2 from the Feature Sets list.

7 Set Print Size to 11x17 SEF (A3 SEF).

8 Choose Finishing 1 from the Feature Sets list.

9 Set Duplex to Top-Top.

10 Choose Finishing 2 from the Feature Sets list.

Xerox 4110 Customer Release Notes

Other manuals for Xerox 4110