INSTALLING PRINTER DRIVERS 9
BEFORE YOU BEGIN
Ask your Integrated Fiery Color Server administrator to do the following in Setup on the
Integrated Fiery Color Server:
• Assign the Integrated Fiery Color Server a valid IP address.
Ask the administrator for the IP address or DNS name because you need it in the
following procedure.
• Configure the Integrated Fiery Color Server for SMB printing.
NOTE: SMB printing is referred to as Windows Printing in Setup and on the Configuration
page.
• Specify the printer driver type, PS or PCL.
For more information, see Configuration and Setup or WebTools Configure Help.
TO SET UP SMB PRINTING ON WINDOWS COMPUTERS
1 Windows 2000/XP/Server 2003: Right-click Network Neighborhood or My Network Places, and
select Find Computer or Search for Computers.
Windows Vista: Click the Start button, choose Control Panel, double-click Network and
Sharing Center, and then click the View computers and devices link.
2 Windows 2000/XP/Server 2003: Type the name or IP address of the Integrated Fiery Color
Server and click Search Now or Search.
Windows Vista: Type the name or \\IP address of the Integrated Fiery Color Server in the
Search field and click Enter.
If you cannot locate the Integrated Fiery Color Server, contact your Integrated Fiery Color
Server administrator.
3 Double-click the name of the Integrated Fiery Color Server to display enabled print
connections.
NOTE: For a description of each print connection, see Configuration and Setup.
To Next Page
Loading...
