Xerox 7600i - Page 165

Xerox 7600i
User’s Guide
165
The pages were probably scanned in crooked, or skewed. To use AutoCrop to Original, the pages must be scanned in
straight.
Problem: If the USB cable is disconnected during a scan, the scanner does not reconnect when the USB cable is
plugged back in.
Unplug the power cable from the scanner, and then plug it back in.
If the scanner does not reconnect:
1. Unplug the power cable from the scanner.
2. Restart your computer.
3. After the restart is complete, plug the power cable back in.