Xerox 900 series User Manual

SUBROUTINES
USED:
COMMENTS:
28
GSYSP, MAGTP, RDMSG, TYPOUT, RDMSGR, TYPM, MTYIO, MSGRST,
QSRCH.
For 900 Series Computers only, the program sets MSFNC and MSFNCl for
communication with the
META-SYMBOL control program. MSFNC (loca-
tion 0273
8
) contains bit settings corresponding to symbolic parameters speci-
fied on the METASYM control card, which specifies the user's input/output
requirements, and
MSFNCl (location 0274
8
) contains a 4-character (BCD)
PROC name.
tF

Xerox 900 series Specifications

General

Brand	Xerox
Model	900 series
Category	Copier
Language	English