Need help?Do you have a question about the Xerox 2515 and is the answer not in the manual?
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Speed | 25 ppm |
| Copy Speed | 25 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Fax Speed | 33.6 Kbps |
| Paper Capacity | 250 sheets |
| Maximum Paper Size | A4 |
| Maximum original size | A4 |
| Warm-up time | 30 seconds |
| Maximum number of copies | 99 copies |
| Reduction/Enlargement | Yes |
| Connectivity | Ethernet |
Describes RAPs as a step-by-step guide to identify problem causes.
Details steps for removing, replacing, and adjusting components.
Lists all Copy Quality Repair Analysis Procedures (RAPs).
RAP for analyzing image quality.
RAP for troubleshooting damaged media issues.
RAP for uniform background copy defects.
RAP for background banding and streaks.
RAP for black copy defects.
RAP for blank copy defects.
RAP for border line copy defects.
RAP for cold flow copy defects.
RAP for developer bead carryover issues.
RAP for edge banding copy defects.
RAP for copy length distortion.
RAP for dry ink disturbance defects.
RAP for overall light copy defects.
RAP for localized deletions in copy image.
RAP for offsetting copy defects.
RAP for registration copy defects.
RAP for residual image copy defects.
RAP for resolution copy defects.
RAP for skewed image copy defects.
RAP for skips in copy image.
RAP for smears in copy image.
RAP for spots in copy image.
RAP for dry ink streaks (Type 1.1).
RAP for unfused copy defects.
RAP for wrinkle deletions.
RAP for trail edge deletion defects.
RAP for developer bias adjustment.
RAP for High Voltage Power Supply issues.
RAP for exposure lamp issues.
RAP for isolating offsetting and residual image problems.
RAP for partial image defects related to foreign accessories.
Procedures for performing diagnostic tests on the copier.
To Next Page
