Xerox 2515

REP 9.8 251 5 Toner Dispense I. Remove the developer module (REP 9.6). Replacement
Solenoid
2. (Figure 1): Remove toner dispense
1. Install the toner dispense solenoid.
solenoid.
Parts List on PL 9.5
2. Adjust the toner dispense solenoid (ADJ
m
DO NOTloosen the screw.
9.5).
Removal
Loosening the screw may cause
binding if the solenoid.-
WARNING
Disconnect the power cord
C
REMOVE THE TONER DISPENSE
SOLENOID
Figure 1. Remove the Toner Dispense Solenoid